- Home
- Brand
- Chuck Type
- Features
- 100% New, (4)
- Auxiliary Handle (3)
- Battery Powered (2)
- Body Only (4)
- Brushless (2)
- Compact (34)
- Compact, Heavy Duty (4)
- Compact, Lightweight (10)
- Cordless (27)
- Depth Adjustment (2)
- Electric Brake (2)
- Free Standing (5)
- Heavy Duty (24)
- Heavy Duty, Compact (3)
- Led (2)
- Lightweight (5)
- Portable (5)
- Single-speed (2)
- Soft Grip (2)
- Variable Speed (2)
- Other (2398)
- Power Source
- Type
- Angle Grinder (30)
- Batteries & Chargers (40)
- Battery (161)
- Battery & Charger (63)
- Chainsaw (24)
- Circular Saw (64)
- Combi Drill (64)
- Drill / Driver (78)
- Drill Set (42)
- Hammer Drill (31)
- Impact Driver (70)
- Impact Wrench (72)
- Jigsaw (54)
- Keyless Chuck (24)
- Power Drills (33)
- Rechargeable Battery (72)
- Reciprocating Saw (35)
- Rotary Hammer Drill (73)
- Saws (36)
- Worklight (32)
- Other (1444)
- Voltage
Makita DTW285Z LXT 18v Brushless 1/2? Impact Wrench Body Only
Makita DTW285Z LXT 18v Brushless 1/2? Impact Wrench Body Only in Makpac Case The Makita DTW285 with Brushless Motor is very similar to the DTW281, but with the added improvement Reverse Rotation Auto-Stop Mode.
This intelligent function works when the bolt/nut is loosened enough, the tool stops the impact and rotation in only 0.2 seconds. Supplied as body only, batteries, charger and case supplied separately. FEATURES: Reverse rotation auto stop mode: This mode works only with pulling the trigger fully in counter-clockwise rotation. When the bolt/nut gets loosened enough, the tool stops the impact and rotation in 0.2 seconds Compact design with overall length of 147mm Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current Battery fuel gauge Phosphorescent bumper Ergonomic soft grip Electric brake Variable speed control by trigger Forward/reverse rotation LED job light Brushless motor Makita DTW285 SPECIFICATION: Voltage: 18v Nut Busting Torque: 400 Nm Max Fastening Torque: 280 Nm Driving Shank: 1/2?
Square Blows per Minute (Hi): 0-3,500 ipm Blows per Minute (Med): 0-2,600 ipm Blows per Minute (Lo): 0-1,800 ipm Standard Bolt: M10-M20 High Tensile Bolt: M10-M16 No Load Speed (hard): 0-2,800 rpm No Load Speed (med): 0-2,100 rpm No Load Speed (soft): 0-1,600 rpm Net weight: 1.7 kg 1 x DTW285Z 1 x Makpac Case NO Battery, NO Charger.