Makita DTD170Z LXT 18v Li-Ion Brushless Cordless Impact Driver Body Only

  

What's in the box. 1x DTD170Z Impact Driver Body Only.

Makita DTD170Z LXT 18v Li-Ion Brushless Cordless Impact Driver Body Only. The new Makita DTD170 impact driver is technically a 6-function impact driver, with four speeds and matched impact power: then the newly introduced operating mode,'T-Mode' is used for tightening self-drilling Tek screws and the new A-Mode (Assist mode) which, when selected starts the rotation slowly allowing maximum control of the screw as it starts to bite into the material. Once the impact driver detects the screw tightening it switches to full speed and full impact power to complete the tightening sequence.

The A-Mode is designed to eliminate'screw cam-out' and'cross threading' caused by high speed rotation before the screw bites in the material. The new Makita DTD170 generates a massive 175 Nm maximum tightening torque with four impact speeds and power stages ranging from soft setting of 1100 rpm and 1100 impacts per minute; through medium and hard setting levels up to a maximum of 3,600 rpm and 3,800 ipm. This impact driver handles high strength bolts up to M14 and 22x125mm coarse thread screws. In line with all new Makita tools the performance increases whilst the overall size of the machines decreases. The new top-of-the-range Makita DTD170 impact driver has a compact overall body length of just 117mm and weighs only 1.5kg.

New impact mode,'Assist-Mode' drives slowly to start screw before full tightening to eliminate "screw cam-out" and "cross threading". TEK mode ('T-mode') reduces impact power during final stages of fastener seating. Electronic 4-stage impact power selection. Massive 175 Nm max tightening torque. More compact body with overall length of just 117mm and lightweight at only 1.5 Kg.

Brushless DC motor with high power to weight and size ratio. Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications. One touch sliding chuck for easy bit installation and removal. Twin LED job lights with pre-glow and afterglow features. Ergonomic soft rubber grip design for vibration absorption and comfortable operation.

Variable speed control by trigger with electric brake. LED Job Light: Yes / Twin / Pre-glow / After-glow. Battery Compatibility: 18v Lithium-Ion (LXT). Variable Speed Control Trigger: Yes / + 4-Stage Impact Power Selection. Max: 0-3600 / H: 0-3200 / M: 0-2100 / S: 0-1100.

High Tensile Bolt Capacity: M5-M14. Coarse Thread Length Capacity (mm): 22-125. Impacts Per Minute (ipm): 4 Stages as below. Max: 0-3800 / H: 0-3600 / M: 0-2600 / L: 0-1100. Net Weight (Kg with 1.5/2Ah Battery): 1.2. Net Weight (Kg with 3/4/5Ah Battery): 1.5. Please note that although images are usually accurate, please refer to the contents list for what is actually included.

Items are brand new and unused unless otherwise stated. On rare occasion, items with broken seal or extra stickers will do so only due to inspection or contents checking - these are still considered brand new and unused.

The item "Makita DTD170Z LXT 18v Li-Ion Brushless Cordless Impact Driver Body Only" is in sale since Thursday, September 13, 2018. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Cordless Drills". The seller is "powertoolworlduk" and is located in Newton Aycliffe. This item can be shipped to United Kingdom.

1. Type: Impact Driver
2. Battery Included: No
3. Brand: Makita
4. Model: DTD170Z
5. Number of Items in Set: 2
6. Voltage: 18 V
7. Motor Type: Brushless
8. Colour: Blue
9. Battery Capacity: 5 Ah
10. MPN: DTD170Z