Makita DML805/2 18v LXT Li-Ion LED Worklight

  
Makita DML805/2 18v LXT Li-Ion LED Worklight. 2-mode operation: delivers 750 lumens on High mode or 450 lumens on Low mode. Up to 8.5 hours of continuous illumination with a 5.0Ah 18V LXT® battery on High mode. Up to 17 hours of continuous illumination with a 5.0Ah 18V LXT® battery on Low mode. Extreme Protection Technology (XPTT) is engineered for improved dust and water resistance for operation in harsh conditions.

Lights effectively illuminate work area without the high heat of halogens. Makita DML805/2 18v Li-Ion LED Worklight - DML805/2. 2-mode, multiple power source bright and even LED lighting for large workspaces.

The new Makita DML805 LED work-light will run on 240v mains power or 14.4v and18v Lithium-ion batteries from the Makita range. The twenty 0.5watt LED's provide a bright and even light and there is a full beam and low level setting on the simple push button control. The light unit is mounted in a rugged moulded carry cradle with flat base and top handle that can serve as a hanging bar. A simple rotating knob releases the angle setting which can spin through 360°.

Ideal for site operations this work-light features Makita Extreme Protection Technology, XPT, against water and dust ingress. It has three tripod mounting options as standard. Using a 4.0Ah 18v Makita Li-ion battery the DML805 LED work-light has a continuous run time in high setting of a useful6.5 hours. Adjusting knobs enable the user to direct the flood light to desired angle. User can choose between battery or corded operation; compatible with 18V LXT® batteries.

Back up power is provided by an 18V LXT® battery and keeps the flood light on if AC power is lost. AC cord is easily stored and wrapped around mounting stand base. Integrated handle can be used as a hanging hook for user convenience. Light will flash to alert user when battery charge is low. Compact design at only 8-3/8 long. Weighs only 5.7 lbs with battery. Flood light can be mounted on optional tripod light stand individually or with two flood lights.

Flood light can be mounted on optional pipe clamp light stand. Lumens - 750 Compatible Battery Cartridges - BL1415, BL1415N, BL1430, BL1440, BL1450, BL1815, BL1815N, BL1820, BL1830, BL1840 and BL1850 Voltage (with battery) - 14.4V or 18V Battery Operating Time - Approx 2 - 17 hours depending on mode and battery Dimensions - 214 mm x 261 mm x 328 mm Voltage - 18 volts Power Source - 100-240V 50-60Hz AC Type of Bulb - LED Batteries, Tripod and Clamp not included. This applies to all tools excluding batteries, chargers, outdoor power equipment and air tools. Contact AHC Powertools and we will advise the best course of action to get your tool repaired.

Generally, we will repair the product and send it back to you or we will return to Makitas Service Centre and they will return your repaired product to you. PLEASE NOTE - The guarantee does not apply where. Repairs have been made or attempted by others. Repairs are required because of normal wear and tear. The tool has been abused, misused or improperly maintained. Alterations have been made to the tool. This does not affect your statutory rights. AB, BT, FK, GY, HS, IM, IV, KA, KW, PA, PH, ZE, all Islands excluding IOW. Orders are dispatched on one of the following services. (Details are within each listing). All customers should expect to receive their orders within 2-3 days maximum.

The following postcodes may take an additional day: AB, BT, IV, KW, PA, PH, all Islands. Once you inform a member our team, you can then return the parcel within 30 days of receiving the goods.

This is under the following conditions. Carriage charges for returning unwanted parcels or items ordered in error are at your expense, we cannot be held responsible for this.

Please use a traceable service, otherwise there is a possibility the courier could misdeliver your goods and your parcel will not be relocated. We cannot be responsible for which courier you choose to return any items back with. It is highly important that you check your goods as soon as they are received. Damaged items delivered with DPD must be noted when you sign for it and reported to us within 24 hours. It must be signed as either damaged or unchecked for the claim to hold. Return costs will only be covered if authorised by a member of the AHC Powertools team. We cannot be held responsible for an arranged collection that fails. If this occurs, you will need to return the parcel of your own accord, no matter the reason for the original collection.

If your item arrives faulty, you must report it to us within 24 hours. Once any return is received back we will process it within 7 days/p>. Emailing us that you wish to cancel your order does NOT guarantee its cancellation. Only once the order has been confirmed as cancelled by a member of our team is this the case.

Once an order is in the despatching process, we are then unable to cancel it. We do not take financial responsibility for the cost of the return of any products ordered in error or that are no longer wanted.

If this is the case you will be contacted by the carrier advising how to arrange redelivery.