Left and right chipping ejection. Base with 3 chamfering grooves. Depth of cut may be adjusted by simply turning the knob on the front of the tool. Spring-loaded stand elevates the base to protect the blades and workpiece.Easy blade setting system for fast blade installation On-tool storage for hex wrench. Ergonomically rubberised handle provides comfortable gripping and more control while minimising hand fatigue and pain. The large 2 finger variable speed trigger makes this jigsaw easy to operate even with gloves on. 3 orbital settings + straight cut. Blower will clear the pencil line of dust.
Tool-less blade change - push in lock system enables very fast blade changes. LED light will illuminate your cut line. Smooth and powerful cutting at the high stroke speed at 2,600 spm.Equipped with Battery protection circuit: designed to protect the battery. From damages due to overdischarge, high temperature or overload current.
Thumb On/Off switch, positioned for ease of use when holding body of machine. Hex wrench holder on body. Accessories can be installed at 30º increments, across 360º. 3-Mode Switch for rotation only, hammering with rotation, or hammering only.2x faster drilling with synchronized RPM and BPM for more efficient drilling. Built-in torque limiter clutch disengages if bit jams when hitting rebar. More compact design at only 330mm long and weighs only 3.2 kg for less operator fatigue.
One touch sliding chuck - for easy bit changes. Ergonomic shape fits like a glove with even pressure and easy control - rubberised handle has anti slip dimples. LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power).Job light with afterglow function - illuminates job in poor lighting conditions. 22 minute charge time with the air cooled Makstar Optimum Charging System. Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time. Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery. Simple to operate electronic push button switch with 3-speed settings. Compact design with short height and lower centre of gravity for better manoeuvrability. Rubberised soft grip of ergonomic design. Falling impact strength of 1m. 18v torch for use with lithium-ion batteries. Torque Settings - 21 + drill. Vibration: Drilling - 9.5 m/sec². Vibration K factor - 1.5 m/sec².
Variable Speed Control - Trigger. Blows per Minute - 0-30000/6000 bpm No Load Speed - 0-2000/400 rpm. Driving Shank: 6.35mm (1/4 in Hex). Machine Screw: M4 - M8.Standard Bolt: M5 - M16. Coarse Thread: 22 - 125mm. Impacts Per Minute: 0 - 3500 ipm.
No Load Speed Hi: 0 - 2900 rpm. Max Tightening Torque 165 Nm. Sound Pressure: 93 dB(A). Sound Power: 104 dB(A).
Sound K Factor: 3 dB(A). Vibration K Factor: 1.5 m/s2. No Load Speed: 12,000rpm. Vibration: K Factor 2.5 m/s². Sound Pressure Level: 84 dB(A).
Sound Power Level: 95 dB(A). Max in steel - 10mm. Max in wood - 135mm.
Strokes per Minute - 0-2600 spm. Noise sound pressure - 78 dB(A).Noise K factor - 3 dB(A). Vibration Cutting Chipboard - 8 m/sec². Vibration Cutting Sheet Metal - 3.5 m/sec².
Grinding Wheel: 4-1/2 / 115mm. Wire Cup Brush: 3-1/2 / 115mm. Sanding Disc: 4-1/2 / 115mm.No Load RPM: 10,000. Spindle Thread: 5/8 - 11 UNC.
Charging Time - 22 min. Oscillation Angle - 3.2 º.
Oscillations per Minute - 6000 - 20000. Vibration: Cutting Metal - 5 m/sec². Vibration: Cutting Wood - 9.5 m/sec².
Vibration: Chiselling - 7.5 m/sec². Vibration: Sanding - 2.5 m/sec². No Load Speed: 0-1,100rpm. Blows per minute: 0-4,000bpm. Vibration: RH:14.5m/s2 HO:11.0m/s2.
Noise sound pressure - 91 dB(A). Noise sound power - 102 dB(A). No Load Speed - 3700 rpm.Vibration: Cutting Chipboard - 2.5 m/sec². Orbits per Minute: 7000/9500/11000 opm.
Orbit Diameter: 2.8 mm. Sanding Stroke per Minute: 14000/19000/22000 spm.
Speed Control: 3 stage push button. Paper Fastening: Hook & Loop. 4 x 5.0Ah BL1850 Batteries.
2 x Duffle Heavy Duty Tool Bag. Additional charges will be imposed if, weight is more than 1 kg. Postcodes Details are Given Below. HS 1-9, I 1-56, KA27-28, KW1-17, PA20-49, PA62-77, PA60-61, PA78, PH17-26, PH-30-44, PH49-50, ZE1-3, BT1-94, IM1-9, IM99, TR21-25, Isle Of Wight. If, you receive any Parcel from us that contains damaged goods, this should be notified to customer services who will arrange for collection and replacement, within the 24-48 hours period.
The item "Makita 18V Li-Ion 10 Piece Monster Kit with 4 x 5.0AH Batteries & Charger in Bag" is in sale since Thursday, October 25, 2018. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Tool Sets". The seller is "tools4trade" and is located in Milton Keynes. This item can be shipped to United Kingdom.