Makita 18V LXT Cordless 10pcs Monster Kit With 4 x 5.0AH BL1850, DC18RC & Case. Makita 10 Piece Kit 18V Li-ion With 4x5Ah Batteries Charger T4TKIT-84. Kit Content: Makita DHP482 Combi Drill Makita DTD152 Impact Driver Makita DJV180 Jigsaw Makita DSS611 Circular Saw Makita DKP180 Planer Makita DHR202 Rotary Hammer Drill Makita DGA452 Angle Grinder Makita DBO180 Orbit Sander Makita DTM50 Multitool Makita DML815 Torch 4 x BL1850 5.0Ah Li-ion Batteries 1 x DC18RC Charger 2 x Medium MacPac Stackable Cases 3 x Large MacPac Stackable Cases. Electric brake Mechanical 2-speed control Variable speed control trigger Forward/reverse rotation Twin LED job light Ergonomic soft grip handle Compact overall length of 198mm Single sleeve keyless chuck Lightweight design Battery protection circuit All metal gears.
Electric Brake Variable speed control trigger Forward/reverse rotation Twin LED job light High rotation speed One-touch bit installation Ergonomically designed soft grip handle Compact overall length of 137mm Lightweight design Battery protection circuit Belt clip. Ergonomically rubberised handle provides comfortable gripping and more control while minimising hand fatigue and pain. The large 2 finger variable speed trigger makes this jigsaw easy to operate even with gloves on. 3 orbital settings + straight cut. Blower will clear the pencil line of dust.
Tool-less blade change - push in lock system enables very fast blade changes. LED light will illuminate your cut line. Smooth and powerful cutting at the high stroke speed at 2,600 spm. 22 minute charge time with the air cooled Makstar Optimum Charging System. Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery. Planes a width of 82mm (3¼) in a single pass.Fitted with a comfortable operator handle. Easy to use adjustable depth settings. A precision machined aluminum base allows for planing accuracy and the cutter head makes 14000 cuts per minute for fast stock removal. The lock -on button gives the operator the option of continuous operation. Left and right handed use due to the buttons on either side of the handle.
Dust extraction port on the side. Adjustable up to a 2mm depth of cut.
Shoe on the underside stops accidental laying down of planer while blade is still moving. Rebates to a maximum depth of 9mm. Lithium -ion batteries have greater life spans than their Ni -MH or Ni -Cad counterparts giving 430% greater run time.
Lithium -ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni -MH battery. Makita DHR202 Rotary Hammer Drill.
3-Mode Switch for rotation only, hammering with rotation, or hammering only 2x faster drilling with synchronized RPM and BPM for more efficient drilling Built-in torque limiter clutch disengages if bit jams when hitting rebar Chisel rotates 360° with 40 different positions to get the best working More compact design at only 330mm long and weighs only 3.2 kg for less operator fatigue Ergonomic shape fits like a glove with even pressure and easy control LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power) Electric brake Forward/reverse rotation Job light Rotary hammer action Rotary only action Variable speed trigger. Electric brake Variable speed control trigger Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current Forward and reverse trigger LED job light Ergonomic soft grip. Simple to operate electronic push button switch with 3-speed settings Connectable to dust extractor Compact design with short height and lower centre of gravity for better manoeuvrability. Thumb On/Off switch, positioned for ease of use when holding body of machine. Hex wrench holder on body.Accessories can be installed at 30º increments, across 360º Uses OIS interface. 12 pivoting positions with 0 to 170º swivel range 4 LED bulb for maximum illumination Lightweight and compact for work in tight spaces Accessory strap enables tool suspension for hands-free work 54 hours of continuous run-time. 4 x BL1850 5.0Ah Li-ion Batteries 1 x DC18RC Charger 2 x Medium MacPac Stackable Cases 3 x Large MacPac Stackable Cases. Part No: T4TKIT-84 Barcode: 8906701866155.
Barcode: 0088381699051 Battery Type Li-ion Voltage: 18V Max. Barcode: 0088381699099 Battery Type: Li-ion Voltage: 18V Driving Shank: 6.35mm (1/4 Hex) Machine Screw: M4-M8 Standard Bolt: M5-M16 High Tensile Bolt: M5-M12 Coarse Thread: 22-125mm Impacts per minute: 0-3500 ipm No Load Speed: 0-2900 rpm Max Tightening Torque: 165Nm Net Weight: 1.5 kg Sound Pressure: 93 dB(A) Sound Power: 104 dB(A) Sound K Factor: 3 dB(A) Vibration: 10.5 m/s² Vibration K Factor: 1.5 m/s². Barcode - 0088381662710 Voltage - 18v Max in steel - 10mm Max in wood - 135mm Strokes per Minute - 0-2600 spm Stroke Length - 26mm Noise sound pressure - 78 dB(A) Noise K factor - 3 dB(A) Vibration K factor - 1.5 m/sec² Vibration Cutting Chipboard - 8 m/sec² Vibration Cutting Sheet Metal - 3.5 m/sec². Barcode : 00088381662635 Planing Width: 82mm - 3¼ Planing Depth: 2mm Max rebate depth: 9mm Battery type: Li -ion Charging Time: 22 min No load speed: 14000rpm.Voltage: 18v Shank Type: SDS+ Plus Capacity in Concrete: 20mm Capacity in Steel: 13mm Capacity in Wood: 26mm Impacts per Minute: 0-4,000 ipm Impact Energy: 2.0 J No Load Speed: 0-1,100 mm Overall Length: 358 mm Net Weight: 3.5 Kg Carbon Brush: 441 NOISE & VIBRATION: Vibration: Drilling: 3 m/sec² Vibration: Chiselling: 11 m/sec² Vibration: Hammer Drilling: 145 m/sec² Vibration K Factor: 15 m/sec² Noise Sound Pressure: 87 dB(A) Noise Sound Power: 98 dB(A) Noise K Factor: 3 dB(A). Barcode: 0088381660112 Grinding Wheel: 4-1/2" / 115mm Cut-Off Wheel: 4-1/2" Wire Cup Brush: 3-1/2" / 115mm Sanding Disc: 4-1/2" / 115mm No Load RPM: 10,000 Watt Hours: 54.0 Battery: 18VDC (3.0Ah) Spindle Thread: 5/8" - 11 UNC Overall Length: 12-1/2". Barcode: 0088381658584 Voltage: 18 v Orbits per Minute: 7000/9500/11000 opm Orbit Diameter: 2.8 mm Battery Type: Lithium-ion Sanding Stroke per Minute: 14000/19000/22000 spm Speed Control: 3 stage push button Charging Time: 22 min Pad brake: Yes Paper Fastening: Hook & Loop Pad Size: 123 mm Paper Size: 125 mm Maximum Output: 190 w. Barcode: 0088381666022 Battery Type - Lithium-ion Charging Time - 22 min Voltage - 18v Oscillation Angle - 3.2 º Oscillations per Minute - 6000 - 20000 Vibration K factor - 1.5 m/sec² Vibration: Cutting Metal - 5 m/sec² Vibration: Cutting Wood - 9.5 m/sec² Vibration: Chiselling - 7.5 m/sec² Vibration: Sanding - 2.5 m/sec².
Continuous Runtime: 6.0Ah - 54 hours Battery: 18V LXT Lithium-ion Lumens: 160 Luminous Flux: 160lm Illuminance at 1m: 3,000lx Overall Length: 272mm. Images for illustrative purposes only please refer to description and specification for full details of product. Additional charges will be imposed if, weight is more than 1kg.Postcodes Details are Given Below. HS 1-9, I 1-56, KA27-28, KW1-17, PA20-49, PA62-77, PA60-61, PA78, PH17-26, PH-30-44, PH49-50, ZE1-3, BT1-94, IM1-9, IM99, TR21-25, Isle Of Wight. If, you receive any Parcel from us that contains damaged goods, this should be notified to customer services who will arrange for collection and replacement, within the 24-48 hours period. The item "Makita 18V Li-ion 10 Piece Monster Kit with 4 x 5.0AH Batteries, Charger & Case" is in sale since Thursday, October 25, 2018. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Tool Sets". The seller is "tools4trade" and is located in Milton Keynes. This item can be shipped to United Kingdom.