Makita T4T6PCKIT 18V LXT 4.0Ah Li-Ion Cordless 6 Piece Kit. Makita DHP453Z 18V LXT Combi Drill. Makita DTD152Z 18V LXT Impact Driver. Makita DHR202Z 18V Rotary Hammer SDS Plus. Makita DGA452Z 18V LXT Angle Grinder.Makita DTM50Z 18V LXT Multi-Tool. Makita DML802 18V LXT Torch. 1 x LXT600 6pc Tool Bag. 3 x 4.0Ah BL1840 Li-ion Batteries.
1 x 18V DC18RC Battery Charger. 22 minute charge time with the air cooled Makstar Optimum Charging System. Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery. Conveniently located push button for forward and reverse. Compact design with a short overall length of 138mm. Fully Compatible with 18V 4.0Ah Battery with 36 minute charge time. LED job light with pre-glow and afterglow functions.
Enhanced dust and drip-proof performance. Compact and lightweight, 4-pole motor. Lithium-ion battery, lighter weight, quicker charging and with more run time than an equal voltage Ni-Cad or Ni-MH battery. LED job light with afterglow. One-touch sliding chuck for easy bit changes.
Triple operation mode: Rotary only, hammer only and rotary hammer. Rotation mode: The chisel can rotate a full 360 degrees with 40 different locking positions. Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. Thumb On/Off switch, positioned for ease of use when holding body of machine. Hex wrench holder on body.
Accessories can be installed at 30º increments, across 360º. Ability to tilt in nine different positions which means no matter where you need the light to point the lamp wont let you down. Can be powered by either 14.4v or 18v li-ion batteries from Makita.
In masonry - 13 mm. Blows per minute - 19500 - 6000bpm. Noise sound pressure - 78dB(A). Noise sound power - 3dB(A).
No Load Speed - 1300 - 400rpm. Torque Settings - 16 + drill. Vibration: Drilling - 2.5 m/sec². Vibration K factor - 1.5 m/sec². Vibration: Hammer Drilling - 7.5 m/sec².
Drive shank Hex - 6.35mm (1/4)Reverse switch. No Load Speed - 0-2300rpm.
Vibration: Fastening Bolt - 15.5 m/sec². Vibration K factor - 2 m/sec². Max in concrete - 20mm. Impact energy - 2.0J. Blows per minute - 0-4000bpm.
Noise sound pressure - 87dB(A). Noise sound power - 98dB(A). Noise K factor - 3dB(A).No Load Speed - 0-1100rpm. Vibration: Drilling - 3 m/sec². Vibration: Hammer Drilling - 14.5 m/sec².
Vibration: Chiselling - 11 m/sec². Grinding Wheel: 4-1/2 / 115mm. Wire Cup Brush: 3-1/2 / 115mm. Sanding Disc: 4-1/2 / 115mm.
No Load RPM: 10,000. Spindle Thread: 5/8 - 11 UNC. Charging Time - 22 min. Oscillation Angle - 3.2 º. Oscillations per Minute - 6000 - 20000.
Vibration: Cutting Metal - 5 m/sec². Vibration: Cutting Wood - 9.5 m/sec².
Vibration: Chiselling - 7.5 m/sec². Vibration: Sanding - 2.5 m/sec².
Battery: 18 V / 14.4 V. Dimensions: (L x W x H) 256 x 79 x 99 mm. BL1415 - Approx 4 Hours. BL1430 - Approx 9 Hours.
BL1440 - Approx 14 Hours. BL1815 - Approx 6 Hours. BL1815N - Approx 7 Hours.BL1830 - Approx 13 Hours. BL1840 - Approx 18 Hours. Additional charges wil be imposed if, weight is more than1 kg.
Postcodes Details are Given Below. HS 1-9, I 1-56, KA27-28, KW1-17, PA20-49, PA62-77, PA60-61, PA78, PH17-26, PH-30-44, PH49-50, ZE1-3, BT1-94, IM1-9, IM99, TR21-25, Isle Of Wight. If, you receive any Parcel from us that contains damaged goods, this should be notified to customer services who will arrange for collection and replacement, within the 24-48 hours period. The item "Makita T4T6PCKIT 18V LXT Li-Ion Cordless 6 Piece Kit + 3 x 4Ah Batteries Charger" is in sale since Monday, October 8, 2018. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Tool Sets".The seller is "tools4trade" and is located in Milton Keynes. This item can be shipped to United Kingdom.